How to Change a Flat Tire on a 2018 Toyota Camry
In this guide, we will teach you how to change a flat tire on a 2018 Toyota Camry. Please follow all instructions carefully to ensure safety and a successful tire change.
Safety Warning
Always remember to park away from traffic and on a flat, stable surface. Use your parking brake and turn on your hazard lights to alert other drivers.
Materials Needed
- Spare tire
- Car jack
- Lug wrench
- Wheel wedges
- Gloves (optional)
Steps to Change a Flat Tire
Step 1: Secure Your Vehicle
Apply the parking brake and place the wheel wedges against the tires opposite to the flat tire. This will prevent your car from moving when you lift it with the car jack.
Step 2: Remove the Hubcap and Loosen the Lug Nuts
Use your lug wrench to loosen the lug nuts – but do not remove them yet.
Step 3: Lift the Vehicle Off the Ground
Position the car jack in the correct spot under your vehicle (refer to your owner's manual if unsure) and lift the car off the ground until the flat tire is about six inches off the ground.
Step 4: Remove the Lug Nuts and the Flat Tire
Now, completely remove the lug nuts and then pull the flat tire toward you to remove it off the hub.
Step 5: Mount the Spare Tire
Position the spare tire on the hub and then apply the lug nuts (but do not fully tighten).
Step 6: Lower Your Vehicle and Tighten the Lug Nuts
Gently lower your vehicle partially and tighten the lug nuts as much as you can. Lower the vehicle completely and remove the jack, then give the lug nuts one final tightening.
Step 7: Replace Your Hubcap
If your hubcap fits with the spare tire, attach it in the same manner as you removed it. If not, stow it with your flat tire.
Conclusion
Changing a flat tire can be accomplished with a few simple tools and steps. Always remember to replace the spare tire with a new, full-sized tire as soon as possible.