Honda Accord (2015) Battery Replacement Guide
Problem: Car Not Starting Due to Dead Battery
A common issue with the Honda Accord model (2015) is failure to start due to a dead battery. Here's a step-by-step guide on how to correctly replace the car battery.
Tools Required
- 10mm open end wrench
- New Battery
- Wire brush
- Baking soda
- Water
- Clean cloth/rags
- Protective gloves
- Safety glasses
Instructions
-
Locate the Battery:
Open the car hood and locate the battery on the driver's side of the engine compartment.
-
Remove the Negative Cable:
Using the 10mm wrench, loose the nut on the negative terminal and remove the negative cable (black). Always remove this first for safety.
-
Remove the Positive Cable:
Repeat the process for the positive terminal (red).
-
Clean the Battery Terminal
Mix a little baking soda with water, then use a wire brush and this solution to clean any visible corrosion from the battery terminal.
-
Remove the Old Battery:
Lift the old battery out of the vehicle.
-
Insert the New Battery:
Insert the new battery in the same orientation as the old one was placed.
-
Reattach the Positive Cable:
Attach and tighten the positive cable first.
-
Reattach the Negative Cable:
Finally, reattach and tighten the negative cable on the terminal.
Conclusion
With these steps, you can successfully change your Honda Accord (2015) battery. Always remember to recycle your old battery responsibly.